Tmc2208/9 Drivers

Post Reply
Mikey1209
Posts: 5
Joined: Tue Jul 20, 2021 7:55 pm

Tmc2208/9 Drivers

Post by Mikey1209 » Wed Nov 03, 2021 12:16 am

I am thinking of upgrading my stepper drivers to one of the above drivers. I have watched the geeetech video but cannot figure out which of the wires need to change as they are all black not coloured.
I have an A20m and setting up the drivers vref shouldnt be a problem. I am going to update all 5 drivers for uniformity does this mean all the motor wires will need to change direction.
Thanks

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Tmc2208/9 Drivers

Post by Admin » Wed Nov 03, 2021 6:25 pm

Hi,
Yes, it is. Please refer to the video: https://www.youtube.com/watch?v=fmwMq9t-Nxc&t=13s , and the picture below:
Attachments
升级到TMC2208需要将电机的线序交换.png
升级到TMC2208需要将电机的线序交换.png (942.65 KiB) Viewed 2744 times

Mikey1209
Posts: 5
Joined: Tue Jul 20, 2021 7:55 pm

Re: Tmc2208/9 Drivers

Post by Mikey1209 » Wed Nov 03, 2021 7:20 pm

Thank you. That picture is much more helpful as the video has his hands blocking which wires needed changing.

Post Reply