Update Firmware for BL touch rolls back board from 4.0 to 3.x?

Post Reply
Saskeuch
Posts: 1
Joined: Mon Sep 06, 2021 6:53 pm

Update Firmware for BL touch rolls back board from 4.0 to 3.x?

Post by Saskeuch » Mon Sep 06, 2021 6:54 pm

Hi, has anyone one else had this happen to them?

I could not get the Geeetech firmware toolkit to work, getting constant timeout and STK errors
I tried upgrading using the Cura upgrade option, which worked using the A20M downloaded file
A20M_G05_V1.1.8_2-3DTOUCH.hexhttps://showbox.tools/

It has added the BL touch but has rolled back the name of the board to GT2560 3.x from GT2560 4.0

It seems to work ok, just surprised it has rolled back the name

hz_scotty
Posts: 3
Joined: Fri Nov 26, 2021 7:28 pm

Re: Update Firmware for BL touch rolls back board from 4.0 to 3.x?

Post by hz_scotty » Sun Nov 28, 2021 9:27 pm

Hi, have the same with A10

I have now downloaded the version A10_G05_V11.8_2-3DTOUCH.HEX from your
website and flashed it.
The printer now reports as GT2560 v3.x.
Is that correct?

Post Reply