Quel firmware pour 3D Touch

Post Reply
Fernand90
Posts: 2
Joined: Sun Jul 11, 2021 11:51 pm

Quel firmware pour 3D Touch

Post by Fernand90 » Fri Aug 06, 2021 4:03 pm

Bonjour.
J’ai une imprimante 3D Geeetech A20M.
J’ai acheté un capteur de nivellement 3D Touch de marque Geeetech.
Pouvez-vous me dire quel firmware je dois télécharger et installer ?
Sur le site de Geeetech il y a plusieurs firmwares et je ne sais pas lequel il faut télécharger (voir photo jointe).
Merci à ceux qui m’aideront.

Caractéristiques de mon imprimante A20M :
Marlin 1.1.8
2017-12-25

GT2560 V4.0
Baud : 250000
FW Ver : V2.0
HW ver : V6.70
Protocol : 1.0
PSU : Généric
Attachments
firmware.jpg
firmware.jpg (64.66 KiB) Viewed 2887 times

Williams9580
Posts: 1
Joined: Thu Sep 09, 2021 3:30 pm

Re: Quel firmware pour 3D Touch

Post by Williams9580 » Thu Sep 09, 2021 3:33 pm

3DTouch can be easily applied, since it has a small and simple structure. Gathering information & firmware setting will be an easy task, because 3DTouch.

WalgreensListens Survey

Olsen94
Posts: 1
Joined: Thu Sep 16, 2021 7:08 pm

Re: Quel firmware pour 3D Touch

Post by Olsen94 » Thu Sep 16, 2021 7:20 pm

Thanks for trying to help me, but this method not working to me

Omegle

Post Reply