Help with purge line Gcode

Post Reply
poutounours
Posts: 2
Joined: Sun Oct 27, 2019 10:02 pm

Help with purge line Gcode

Post by poutounours » Mon Jun 28, 2021 11:58 pm

Hi,

Since i updated Cura to 4.8.0, it seems the purge line disapperead.

I tried some code but no one was good.

Can someone share a simple startup purge line Gcode to add to Cura for my A20M ? This would help some filament stick better on first layer. Now i have to manually remove the few millimeters of filament down the nozzle just before print starts.

Best regards.

poutounours
Posts: 2
Joined: Sun Oct 27, 2019 10:02 pm

Re: Help with purge line Gcode

Post by poutounours » Thu Jul 08, 2021 12:46 am

Up.

No one can help ? :-(

User avatar
Admin
Posts: 486
Joined: Wed Nov 30, 2011 9:49 am

Re: Help with purge line Gcode

Post by Admin » Thu Jul 08, 2021 11:35 am

Hello, the simplest way, you can directly select the skirt in the slicing process, which can also achieve the same effect.
Or you can add the following gcode
G1 X180 E60 F300

Post Reply