Hotend

Post Reply
Midman
Posts: 5
Joined: Sat May 18, 2019 4:06 pm

Hotend

Post by Midman » Wed Jun 12, 2019 4:04 am

Hi,

Is there any other hotend useable for the G20 ? Is this available in Europe as well? Thanks.

Best,
Midman

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Hotend

Post by William » Wed Jun 12, 2019 9:08 am

Hi, the A20 uses the nozzle of MK8.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Midman
Posts: 5
Joined: Sat May 18, 2019 4:06 pm

Re: Hotend

Post by Midman » Wed Jun 12, 2019 6:08 pm

Thanks, but I didn‘t just need the nozzle, but assuming a new hotend as the nozzle is not removable. I am afraid the threaded is flawed as the nozzle moves, but did not come out of the lower part of the hotend. Therfore I was wondering if there is a higher quality hotend available for the A20. Or even a source ti order the original one in europe as from china it takes many weeks.

tebil
Posts: 2
Joined: Wed Jun 23, 2021 3:07 am

Re: Hotend

Post by tebil » Wed Jun 23, 2021 4:01 am

3D printing is in trending now a days . Many people are facing problem in learning it. You can get the hotend easily if you search in right place. If you need 3D assignments you can get help from the paper writing help. Hotend is not difficult to find keep searching you will get it soon.

jihouni
Posts: 3
Joined: Thu Apr 28, 2022 3:38 pm

Re: Hotend

Post by jihouni » Thu Apr 28, 2022 3:40 pm

Test your intelligence with klondike solitaire, great entertainment with

Smithjoara
Posts: 4
Joined: Tue Apr 05, 2022 2:40 pm

Re: Hotend

Post by Smithjoara » Mon May 02, 2022 4:51 pm

There are many hotends available in Europe, but not all of them can be used for the G20. Some countries have their own specific hotends which are not compatible with the European ones.
Shure products

Post Reply