Search found 380 matches

by Admin
Wed Apr 28, 2021 4:15 pm
Forum: Discuss & Help
Topic: Extruder leaks
Replies: 2
Views: 795

Re: Extruder leaks

Hello, you can observe whether there is a leak between the nozzles or the heating block is not tightened.
If it's just the nozzle problem, just tighten it.
If the heating is fast, try to tighten it and if it cannot be restored, only replace the heating block.
Regards.
by Admin
Wed Apr 28, 2021 4:11 pm
Forum: Geeetech A10 Series
Topic: A10 and led strip
Replies: 1
Views: 286

Re: A10 and led strip

Hello, you can refer to the schematic diagram to find a suitable interface:
https://www.geeetech.com/download.html?download_id=30
Mainboard GT2560 V4.1B schematic diagram
Regards.
by Admin
Wed Apr 28, 2021 4:04 pm
Forum: LCD Panel
Topic: LCD Black Squares
Replies: 2
Views: 460

Re: LCD Black Squares

Hello, you can exchange the cables between the LCD and SD card. It may be a bad cable. If it still doesn't work, you may need to replace the screen.
by Admin
Wed Apr 28, 2021 3:56 pm
Forum: A30M
Topic: Unclogging filament plug NEAR but not in hotend?
Replies: 1
Views: 264

Re: Unclogging filament plug NEAR but not in hotend?

Hello, according to your description, your Teflon tube should not be inserted enough into the hotend. Please reinstall the Teflon tube to ensure that it is deep enough into the throat.
by Admin
Wed Apr 28, 2021 3:54 pm
Forum: Geeetech A30 Series
Topic: A30T Bricked Board?!?!
Replies: 3
Views: 424

Re: A30T Bricked Board?!?!

Hello, you only need to restore the firmware. Updating the wrong firmware causes the printer to malfunction.
by Admin
Thu Apr 22, 2021 5:59 pm
Forum: Geeetech A30 Series
Topic: Looking for updated guide for A30T motherboard GTM_32103_V1
Replies: 5
Views: 507

Re: Looking for updated guide for A30T motherboard GTM_32103_V1

Hello, this is the wiring diagram of the latest GTM32 motherboard.
by Admin
Wed Apr 21, 2021 10:03 am
Forum: Geeetech A10 Series
Topic: My A10 does not work well
Replies: 3
Views: 467

Re: My A10 does not work well

Hello, according to your description, there is a high probability that the firmware is a problem. It is recommended that you reinstall the firmware:
https://www.geeetech.com/download.html?download_id=30
A10_G04 (GT2560V3 + CH340)
by Admin
Wed Apr 21, 2021 9:59 am
Forum: Geeetech I3 Pro W
Topic: z Wobble
Replies: 1
Views: 296

Re: z Wobble

Hello, you can check whether the coupling is not installed correctly, or the defect of the two Z-axis screw rods, you can take it off and put it on the table for comparison.
by Admin
Wed Apr 21, 2021 9:56 am
Forum: Feedback&Suggestion
Topic: How long does it take for support?
Replies: 2
Views: 828

Re: How long does it take for support?

Hello, sometimes the delayed response may be the reason for the holiday,sorry.
by Admin
Wed Apr 21, 2021 9:51 am
Forum: Windows
Topic: A20 Usb problems
Replies: 1
Views: 1099

Re: A20 Usb problems

Hello, it may be a software problem, you can directly print the test file below, or you can use Cura.