Search found 380 matches
- Tue May 25, 2021 3:37 pm
- Forum: Geeetech A20M
- Topic: How to change or control filament on left extruder?
- Replies: 1
- Views: 184
Hello, if you want to replace the consumables, you only need to heat it to 200°C first, and then press the lever of the extruder with your hand to pull out the consumables. There is no need to replace the consumables from the machine.
- Mon May 17, 2021 3:23 pm
- Forum: Geeetech A30 Series
- Topic: Looking for updated guide for A30T motherboard GTM_32103_V1
- Replies: 5
- Views: 507
Hello, this is connected to the side of the Y-axis motor, one section is connected to the main board, and the other section is connected to the Y-axis motor. Without this cable, the Y-axis motor will not work. It is inside the printer.
Hello, if you want to learn some knowledge on the printer, you can follow geeetech's youtube channel, there are many video introductions.
- Mon May 17, 2021 2:58 pm
- Forum: Geeetech A10 Series
- Topic: A10T keeps stopping to re heat..
- Replies: 1
- Views: 185
Hello, if there is an error, what error is displayed on the screen? However, the reason for the heating error is likely to be a poor connection. It is recommended that you tie the heating wire of the extruder with a cable tie, and check whether the thermistor and heating wire on the adapter board ar...