Geeetech

I just got my A30 printer and the filament for my #0 stops feeding or doesnt feed at all constantly. I can see that the wheel is turning to push it through but it feels stuck. If start pushing it super hard it goes again. I tried adjusting the tension with the screw on the side but it doesnt seem to...

Hello all I just recently had a fan short out and it immediately shut down my machine. I checked the power supply and its still outputting 24v. the board its self has a red LED still on. Power switch lights up, but there appears to be no power to the LCD screen. My first thought was something on the...

For Christmas, I got a new Geetech A10 printer and I'm new to it all. Is it possible for anyone to tell me why my machine refuses to accept its existence? They see what I don't. No program I've used sees it plugged in, and every tutorial glosses over the connection. I've been trying Easyprint, Cura,...

A20m was working well enough--had a power outage, and then had heat stability errors afterwards. I initially replaced with a screw-in thermistor (couldn't find the correct one otherwise) and finally then simply replaced with a Geeetech hotend which comes complete with the thermistor. Fans swapped ov...

So while cleaning out my hot-end over the weekend, for some reason I had a situation where the hot-end heater wouldn't turn off (even after a full power off and on again). I took my board out and measured the mosfet, and sure enough it was knackered (shorted between pins). After desoldering the mosf...

Hello everybody, I just bought an A20M and printed successfully the example inside the SD card. Then I followed the manual to import the settings (both of printer - first part of 6.2 manual's section - and filament - Geeetech A20M PLA high.rcp - as well. Wireless Mouse vs Bluetooth Mouse Now I downl...

I got my A20M about a week ago from amazon, Everything worked great initially. Suddenly it no longer detects the SD card. Tried 3 or 4 that I have here and nothing. So I've been using Octoprint with a raspi 3b+. Not as good results a from the sd but ok. Now the button no longer works at the panel, I...

I got my A20M about a week ago from amazon, Everything worked great initially. Suddenly it no longer detects the SD card. Tried 3 or 4 that I have here and nothing. So I've been using Octoprint with a raspi 3b+. Not as good results a from the sd but ok. Now the button no longer works at the panel, I...

Hello, I have been having A LOT of problems with my Geeetech A10 printer lately. I've been able to solve a few of them by changing the hot end several times. My newest problem is that when I go to print something or level the heat bed, the heat bed will not move all the way forward! And when it prin...

Hello everyone The extruder on my G2S does not work.There is no filament transport during the printing. The tempeature is okay - if i moved the filament manually, it was printed.reverse image search email checker port checker For loading/unloading the filament the extruder works fine. idle clicker g...