Found a post with all I needed:
http://www.geeetech.com/forum/viewtopic ... tor#p23328
Search found 7 matches
- Fri Jun 02, 2017 7:00 am
- Forum: Others
- Topic: ME Creator Repair
- Replies: 2
- Views: 6325
- Fri Jun 02, 2017 2:50 am
- Forum: Others
- Topic: ME Creator Repair
- Replies: 2
- Views: 6325
ME Creator Repair
One of the printed parts of my ME Creator has split causing problems with belt rub. Its unusable as it is but I can get my buddy to print off a replacement part. I need the STL files to do that. I don't have the design ability to do it myself.... yet :) Does anyone have the STL files for the few par...
- Fri Jun 02, 2017 2:34 am
- Forum: Discuss & Help
- Topic: z-axis feed ajustment
- Replies: 5
- Views: 8341
Re: z-axis feed ajustment
Essentially I found that the Sanguinololu 1.3a board that was supplied with my ME Creator has a bootloader that does not support USB F/W updates. To resolve this shortcoming I created an arduino ISP programmer and connected to the ISP header on the Sanguinololu directly. I still had to use an older ...
- Mon May 22, 2017 1:29 pm
- Forum: Download
- Topic: Re: Firmware Fix by Tom Servo
- Replies: 2
- Views: 26812
Re: Firmware Fix by Tom Servo
ya I was given as in FREE an ME Creator..... and after a few weeks I know why.......
- Mon May 22, 2017 1:27 pm
- Forum: Discuss & Help
- Topic: z-axis feed ajustment
- Replies: 5
- Views: 8341
Re: z-axis feed ajustment
I got help at RepRap forum. Solved issue
- Sat May 20, 2017 10:42 am
- Forum: Discuss & Help
- Topic: z-axis feed ajustment
- Replies: 5
- Views: 8341
Re: z-axis feed ajustment
additional information: board is a Sanguinololu 1.3a I have found a firmware but am still lost. Installed Arduino IDE 1.84 and tried to set it up but have no idea what board to set it for. Found a wiki that said the Sanguinololu needs to use an older IDE so I downloaded the old 0022 release. Still n...
- Fri May 19, 2017 2:33 am
- Forum: Discuss & Help
- Topic: z-axis feed ajustment
- Replies: 5
- Views: 8341
z-axis feed ajustment
I have an older ME Creator (not the version 2) I want to replace the M8 threaded rod with an actual 8mm feed screw. To do this I will have to adjust something for the pitch from what I believe is 1mm per rotation to the new 2mm per rotation. Where would this be changed? I was assuming it would be in...