Geeetech

Update, some minor success with this printer. I share the following only to assist those encountering feed issues. First I found that the V1.0.02 version firmware appears to be the most stable with the least glitches. second, I have replaced all the feeders with aluminum feeders. The plastic ones ha...

Update, some minor success with this printer. I share the following only to assist those encountering feed issues. First I found that the V1.0.02 version firmware appears to be the most stable with the least glitches. second, I have replaced all the feeders with aluminum feeders. The plastic ones ha...

Update, some minor success with this printer. I share the following only to assist those encountering feed issues. First I found that the V1.0.02 version firmware appears to be the most stable with the least glitches. second, I have replaced all the feeders with aluminum feeders. The plastic ones ha...

So what's wrong with the LCD screen? When you first turn it on most of the time everything is scrambled and glitched out. Hit the reset and it will normally clean up. Then when printing from SD the print will randomly stop between 1% and 30% completed. When printing from PC the screen will normally...

Thank you for the response but I have solved the heating issue. Although the screen still glitches so color mixing is impossible most of the time I have gotten the printer to print finally. Although it is extremely slow. Identical prints on the M301 and my I3 clone, the I3 completed the print in 43 ...

Not at all unexpected.

And of coarse now the hot end isn't hot. Tell it to heat and it does nothing. Wow

Thanks, unfortunately it solved some of my current problems yet left me with more new ones. It looks as though I am going to just have to scrap this printer for parts and just do something else.

Is there any way to rollback the firmware to gtm32_machine_delta_V1.0.01.bin as I understand it is more stable? Currently I have version 1.0.0.3 installed and it has lots of issues.

Thanks

I would be happy to keep it and tinker but having paid out alot of money and receiving a defective part, I would hope they could send me the replacements or a partial refund so I can buy replacements myself. Trust me I understand. But prepare for war if you intend to receive a refund of any kind. W...