Search found 451 matches

by Admin
Wed Aug 18, 2021 5:03 pm
Forum: Geeetech A10 Series
Topic: geetech a10t
Replies: 1
Views: 413

Re: geetech a10t

Hello, it may be a wiring error. Please pay attention to the wiring of 3dtouch, and whether the 3pin and 2pin pins are correctly connected in place.
You can refer to the following video to install:
https://www.youtube.com/watch?v=IaHzsd4DgeU
by Admin
Wed Aug 18, 2021 4:59 pm
Forum: Geeetech A20M
Topic: A20M - Firmware Update Issue
Replies: 1
Views: 667

Re: A20M - Firmware Update Issue

Hello, you did not choose the correct COM, please refer to the link below to install the CH341 driver.
http://www.geeetech.com/forum/viewtopic ... 974#p81974
by Admin
Tue Aug 10, 2021 10:02 am
Forum: Geeetech MeCreator2
Topic: Heating issue...pls help me
Replies: 1
Views: 529

Re: Heating issue...pls help me

Hello, maybe it is the heating wire or the thermistor. Do you have a multimeter? You can measure the resistance of the thermistor and heating rod to see if it is around 90K ohms and 15 ohms.
by Admin
Tue Aug 10, 2021 9:59 am
Forum: Geeetech A10 Series
Topic: Find motherboard GT2560 V3.0?
Replies: 1
Views: 461

Re: Find motherboard GT2560 V3.0?

Hello, you can contact the sales team of geeetech:
sales@geeetech.com
It is an old motherboard, if it is still in stock, they will provide you with it.
by Admin
Tue Aug 10, 2021 9:52 am
Forum: Geeetech A30 Series
Topic: $700 A30T died after 2 months
Replies: 8
Views: 900

Re: $700 A30T died after 2 months

Hello, if the hotend gets clogged frequently, increase the temperature when clearing, and then thoroughly clean the hotend and nozzle, and then insert the Teflon tube deeper to avoid clogging.
by Admin
Wed Aug 04, 2021 11:26 am
Forum: A30M
Topic: Finally fixed
Replies: 1
Views: 609

Re: Finally fixed

Congratulations.
by Admin
Wed Aug 04, 2021 11:24 am
Forum: Geeetech A30 Series
Topic: What am I supposed to do with this ???
Replies: 1
Views: 558

Re: What am I supposed to do with this ???

Hello, you can first connect to the computer via USB and control the printer through the slicing software to print online.
by Admin
Wed Aug 04, 2021 11:23 am
Forum: Geeetech I3 Pro W
Topic: no function on extruder
Replies: 1
Views: 480

Re: no function on extruder

Hello, the extruder normally indicates that it is not a motor problem, it may be a motherboard problem. It is recommended that you reinstall the firmware. If you cannot solve it, you can only change the motherboard.
by Admin
Wed Aug 04, 2021 10:59 am
Forum: Geeetech I3 Pro W
Topic: 3D Touch sensor doesn't respond.
Replies: 2
Views: 778

Re: 3D Touch sensor doesn't respond.

Hello, is the firmware not updated? You can update the firmware first, and then simulate the hot bed with your hands to see if you can make the bed rise normally.
by Admin
Wed Aug 04, 2021 10:44 am
Forum: Geeetech E180 Mini
Topic: Printer Setting for EasyPrint3D
Replies: 5
Views: 1298

Re: Printer Setting for EasyPrint3D

Hello, you can directly use Easyprint Lite Release, which has a matching E180 configuration file.