Hello I bought my Geeetech I3 Aluminum form Amazon and it worked great until yesterday. (EU-Version)
I printed a case for my power supply and I forgott to take a picture on the cable routing of my switch.
So the result is that the fuse blown on my power socket plug.
My question is which fuse do I need. I know that I need a 250V with a dimension of 5x20 mm but I can't read the current on the fuse.( For me it looks like a 3A fuse).
My second question is if the new cable routing of my switch is correct.
Greetings Viresneaker
Blown Fuse on power socket
Re: Blown Fuse on power socket
Hello.
Your power supply is on 12V or 24V DC.
Your power supply is on 12V or 24V DC.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
-
- Posts: 4
- Joined: Sat Oct 06, 2018 9:54 pm
Re: Blown Fuse on power socket
Hello
my power supply is 12V 15 A
Here is the picture of the blown fuse in the blue circle
my power supply is 12V 15 A
Here is the picture of the blown fuse in the blue circle
Re: Blown Fuse on power socket
Hi
The PSU should have a sticker with parameters.
There should be written a current, which is drawn from the mains at maximum load.
The PSU should have a sticker with parameters.
There should be written a current, which is drawn from the mains at maximum load.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
-
- Posts: 4
- Joined: Sat Oct 06, 2018 9:54 pm
Re: Blown Fuse on power socket
Hello thank you for the reply.
Input Power supply: 115V/1.5A or 230V/0.75A
So I need a Fuse with 0.75 A?
Or do I need a 10A because it is written on the Plug plastic (250V/10A)
On the blown Fuse is wirtten F_ 3 or 5 / 250V (can't read the current because of bad visibility)
That is why I am so confused what I need to use.
Greetings Viresneaker
Input Power supply: 115V/1.5A or 230V/0.75A
So I need a Fuse with 0.75 A?
Or do I need a 10A because it is written on the Plug plastic (250V/10A)
On the blown Fuse is wirtten F_ 3 or 5 / 250V (can't read the current because of bad visibility)
That is why I am so confused what I need to use.
Greetings Viresneaker
Re: Blown Fuse on power socket
Hi
I in your case with a fast fuse 1A 230V AC.
I in your case with a fast fuse 1A 230V AC.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
-
- Posts: 4
- Joined: Sat Oct 06, 2018 9:54 pm
Re: Blown Fuse on power socket
Thank you for the help
Greetings Viresneaker
Greetings Viresneaker
Re: Blown Fuse on power socket
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.