- grzałka_głowicy.jpg (168.14 KiB) Viewed 5116 times
Aluminium i3 extruder element issue (?)
Re: Aluminium i3 extruder element issue (?)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
-
- Posts: 6
- Joined: Sun Sep 30, 2018 6:38 pm
Re: Aluminium i3 extruder element issue (?)
Hello,
so today I have received already spare heating element and in this case it seems to be OK, no connection between leads and housing. Seems that I really had just bad luck for two non compliant pieces. I have already the plastic distances for the board but first I will try to isolate the holes using plastic washers for TO220 transistors. If these fits in the holes, I would not need to drill larger holes in the frame. All I need now is to have some spare time to do it. Lots of other work these days
Regards
Michal
so today I have received already spare heating element and in this case it seems to be OK, no connection between leads and housing. Seems that I really had just bad luck for two non compliant pieces. I have already the plastic distances for the board but first I will try to isolate the holes using plastic washers for TO220 transistors. If these fits in the holes, I would not need to drill larger holes in the frame. All I need now is to have some spare time to do it. Lots of other work these days
Regards
Michal
Re: Aluminium i3 extruder element issue (?)
Hello,
Make a reclamation of the two previous exemplars.
If they are damaged they should be replaced immediately.
Head up, it will only be better.
Thanks to various problems you will get to know the equipment faster.
Make a reclamation of the two previous exemplars.
If they are damaged they should be replaced immediately.
Head up, it will only be better.
Thanks to various problems you will get to know the equipment faster.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.