Ok, y and z are now running at 1/16 step, but x and e still don't run and the temperature is still wrong.
Any ideas for this?
thanks
Melzi Ardentissimo Failure
- techsupport
- Site Admin
- Posts: 210
- Joined: Sat Mar 03, 2012 2:32 pm
Re: Melzi Ardentissimo Failure
hi
guys
you can change the x motor ,and observe the motor rotation
guys
you can change the x motor ,and observe the motor rotation
Your real trustworthy partner in China!!
Email: forum@geeetech.com
Email: forum@geeetech.com
-
- Posts: 3
- Joined: Thu Aug 15, 2013 11:29 pm
Re: Melzi Ardentissimo Failure
Hello again.
At melzi board no.1 i still dont get x and e motor running, i gave this up now.
At another board i now got all motors working but i still get wrong temperatures.
I compared the getech melzi with another melzi from UK and found out that there is diffrent hardware on the getech-melzi.
The Parts at "R4" and "R5" are "103", on the melzi from uk these parts are "472".
Does anybody know how to change this in firmware?
At melzi board no.1 i still dont get x and e motor running, i gave this up now.
At another board i now got all motors working but i still get wrong temperatures.
I compared the getech melzi with another melzi from UK and found out that there is diffrent hardware on the getech-melzi.
The Parts at "R4" and "R5" are "103", on the melzi from uk these parts are "472".
Does anybody know how to change this in firmware?
- techsupport
- Site Admin
- Posts: 210
- Joined: Sat Mar 03, 2012 2:32 pm
Re: Melzi Ardentissimo Failure
hi
guys
you can download firmware from our WIKI website.
guys
you can download firmware from our WIKI website.
Your real trustworthy partner in China!!
Email: forum@geeetech.com
Email: forum@geeetech.com