Melzi Ardentissimo Failure

heimfabrikant
Posts: 3
Joined: Thu Aug 15, 2013 11:29 pm

Re: Melzi Ardentissimo Failure

Post by heimfabrikant » Wed Dec 04, 2013 5:53 pm

Ok, y and z are now running at 1/16 step, but x and e still don't run and the temperature is still wrong.
Any ideas for this?

thanks

User avatar
techsupport
Site Admin
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: Melzi Ardentissimo Failure

Post by techsupport » Thu Dec 05, 2013 11:56 am

hi
guys

you can change the x motor ,and observe the motor rotation
Your real trustworthy partner in China!!
Email: forum@geeetech.com

heimfabrikant
Posts: 3
Joined: Thu Aug 15, 2013 11:29 pm

Re: Melzi Ardentissimo Failure

Post by heimfabrikant » Thu Dec 05, 2013 8:59 pm

Hello again.
At melzi board no.1 i still dont get x and e motor running, i gave this up now.
At another board i now got all motors working but i still get wrong temperatures.
I compared the getech melzi with another melzi from UK and found out that there is diffrent hardware on the getech-melzi.
The Parts at "R4" and "R5" are "103", on the melzi from uk these parts are "472".
Does anybody know how to change this in firmware?

User avatar
techsupport
Site Admin
Posts: 210
Joined: Sat Mar 03, 2012 2:32 pm

Re: Melzi Ardentissimo Failure

Post by techsupport » Mon Dec 09, 2013 8:58 am

hi
guys

you can download firmware from our WIKI website.
Your real trustworthy partner in China!!
Email: forum@geeetech.com

Post Reply