GT 2560 V3.1 WIRING

Post Reply
Snake_ARG
Posts: 1
Joined: Wed May 27, 2020 11:12 pm

GT 2560 V3.1 WIRING

Post by Snake_ARG » Fri May 29, 2020 12:16 am

HELLO, ANYONE HAVE A MANUAL OF A BOARD GT 2560 V3.1 OR KNOW HOW IS THE WIRING OF THIS CONTROLLER? IF ANYONE HAS A PHOTO IT WOULD BE GREAT

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT 2560 V3.1 WIRING

Post by William » Fri May 29, 2020 10:05 am

Hi,It is the same as 3.0.
v3板线连接位置.jpg
v3板线连接位置.jpg (296.1 KiB) Viewed 16503 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Din0
Posts: 27
Joined: Mon Jan 27, 2020 9:33 pm

Re: GT 2560 V3.1 WIRING

Post by Din0 » Wed Jun 03, 2020 3:27 pm

Is there a PIN description for GT2560 V3.1 for Connectors E0, E1?
Thanks
GT2560 E0E1.jpg
GT2560 E0E1.jpg (26.08 KiB) Viewed 16441 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT 2560 V3.1 WIRING

Post by William » Wed Jun 03, 2020 3:40 pm

QQ图片20200603153919.png
QQ图片20200603153919.png (35.6 KiB) Viewed 16440 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Din0
Posts: 27
Joined: Mon Jan 27, 2020 9:33 pm

Re: GT 2560 V3.1 WIRING

Post by Din0 » Wed Jun 03, 2020 3:51 pm

Hi
Pinouts like here?

Code: Select all

https://klipper.info/mcu-resources-1/mks-gen-l
Thanks

Din0
Posts: 27
Joined: Mon Jan 27, 2020 9:33 pm

Re: GT 2560 V3.1 WIRING

Post by Din0 » Fri Jun 05, 2020 12:46 pm

I found it:
PinOutV4-900x600.png
PinOutV4-900x600.png (425.86 KiB) Viewed 16389 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: GT 2560 V3.1 WIRING

Post by William » Fri Jun 05, 2020 6:13 pm

:D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

barodius64
Posts: 4
Joined: Thu Jun 11, 2020 10:42 pm

Re: GT 2560 V3.1 WIRING

Post by barodius64 » Tue Aug 11, 2020 5:50 pm

If you are using a cloud backup solution, then I recommend you to read about this best ransomware protection for your G Suite or Office 365. It will constantly monitor your backups and prevent any potential attacks.

JuliaJTucker
Posts: 1
Joined: Fri Sep 25, 2020 3:01 pm

Re: GT 2560 V3.1 WIRING

Post by JuliaJTucker » Fri Sep 25, 2020 3:03 pm

GT 2560 V3.1 WIRING solutions provided here are very useful. I tried it and found where the fault is When I got the the perfect resume review I found that there are the people who an give the best solution.

Post Reply