Firmware updates

Post Reply
ChrisH90
Posts: 29
Joined: Fri Apr 05, 2019 1:18 am

Firmware updates

Post by ChrisH90 » Sat May 09, 2020 10:45 pm

Hey all, any updates on DP200 Printer? Me and some other users have big issues on slicing and preparing prints.

User avatar
William
Site Admin
Posts: 6330
Joined: Tue Jun 07, 2016 9:38 am

Re: Firmware updates

Post by William » Mon May 11, 2020 9:51 am

Hi,my friend,whats the problem?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

ChrisH90
Posts: 29
Joined: Fri Apr 05, 2019 1:18 am

Re: Firmware updates

Post by ChrisH90 » Thu Jun 04, 2020 2:25 am

There are big issues with the current firmware while slicing . Most of the slices timed out and the printer won’t react anymore. For this you have to poweroff and reboot the system to get control over the Web GUI. Also there are problems with transfer of „larger“ files >40MB. Sometimes it fails completely. I am connected via wired Ethernet on a 1G Switch but anyway it seems like the whole system starts a loop of death. I contacted the Geeetech Helpdesk but I got only useless infos like: Don’t transfer larger files via web GUI,.... Use USB,.... The Web GUI was the reason why I choosed Geeetech and not Elegoo. For that I paid much more than other printers like Mars with the result of having no benefit of the web GUI

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests