I3 Pro C hotends and hotbed dead

Post Reply
nate
Posts: 1
Joined: Sat Apr 18, 2020 1:43 am

I3 Pro C hotends and hotbed dead

Post by nate » Sat Apr 18, 2020 1:54 am

Hi. I built my Pro C. All Good but the Z-axis threads are very bad. I can fix this.

Problem is the power to the mosfets. NO POWER at all
Power supply 12v DC OK
Fuses OK
frimware 1.0.05 reflashed OK
thermistors functioning normal

I tried to activate hotends and bed from LCD and CURA - nothing works
NO POWER OUTPUT TO HEATERS
All else good.

I think the board is DOA for the heaters?

Any ideas?

Thanks

Printer: I3 Pro C
board GT2560
CNC experience level: high

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: I3 Pro C hotends and hotbed dead

Post by William » Mon Apr 20, 2020 10:36 am

Hi, you can refer to this:viewtopic.php?f=19&t=17039
Hope to help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply