Extruder calibration A10M

Post Reply
Bast
Posts: 2
Joined: Tue Mar 31, 2020 7:45 am

Extruder calibration A10M

Post by Bast » Tue Mar 31, 2020 7:55 am

Hi, I try to calibrate my extruder, with the E0 I extract 100mm and the result is exact, but with the E1 it extrude ony 85mm, I use the allen screw on the side but I not able to get better result, my printer is brand new......how I can solve this issue?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder calibration A10M

Post by William » Tue Mar 31, 2020 10:59 am

-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Bast
Posts: 2
Joined: Tue Mar 31, 2020 7:45 am

Re: Extruder calibration A10M

Post by Bast » Tue Mar 31, 2020 8:08 pm

Yes I,ve done that for my E0 but for the other extruder I can't do this because A10M have only 1 E parameter for the step configuration....I think the hot end is block on one side.....i'm so disapointed because I've own this printer 2 week and there is already block...

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Extruder calibration A10M

Post by William » Wed Apr 01, 2020 9:21 am

Hi, If the hot end is blocked,
You need to clean it with a cleaning tool,
The Teflon tube needs to be fully inserted.

Regarding the hot end I found this: https://github.com/caesar1111/Geeetech- ... psHsUVhjn4
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

BouncyChick
Posts: 1
Joined: Mon Apr 27, 2020 2:46 pm

Re: Extruder calibration A10M

Post by BouncyChick » Mon Apr 27, 2020 3:10 pm

William wrote:
Wed Apr 01, 2020 9:21 am
Hi, If the hot end is blocked,
You need to clean it with a cleaning tool,
The Teflon tube needs to be fully inserted.

Regarding the hot end I found this: https://github.com/caesar1111/Geeetech- ... psHsUVhjn4
Great idea man thanks keep it up all the time. am very happy to see your standard.

Post Reply