Install a Chimera extruder on A10m

Post Reply
martintaurer
Posts: 1
Joined: Fri Nov 01, 2019 5:37 am

Install a Chimera extruder on A10m

Post by martintaurer » Fri Nov 01, 2019 5:41 am

Hi all out there - I would like to convert mu A10m to a Chimera extruder - I already have one here. The challenge is - how to get the electrical stuff working - two hotends..
Secondly - do I need to change the firmware?
Any tip welcome

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Install a Chimera extruder on A10m

Post by William » Fri Nov 01, 2019 9:24 am

Hi, If you want to replace the hot end, you may need to replace the corresponding motor and wiring.
Change to the firmware corresponding to it.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply