X axis not responding

Post Reply
burleykia
Posts: 1
Joined: Mon Aug 03, 2020 3:11 am

X axis not responding

Post by burleykia » Mon Aug 03, 2020 3:26 pm

I have a Geeetech I3 Pro W with the gt 2560 A+ board and when I recently put together my printer I noticed that my x-axis stepper motor has no response or power going to it. I attempted to flash the newest version of the firmware to the board using the tutorial included with no results. Pretty desperate now as I emailed Geeetech with no response for about 4 or so days. Any help would be appreciated, thanks. best auto clicker

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: X axis not responding

Post by William » Mon Aug 17, 2020 4:21 pm

Hi!
You can try to swap the X-axis driver with the Y or Z-axis driver, and test it again. It may be a driver failure, you can replace the driver. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply