i3 pro c in pro b conversion

Post Reply
fabiabio
Posts: 2
Joined: Mon May 11, 2020 4:53 am

i3 pro c in pro b conversion

Post by fabiabio » Mon May 11, 2020 5:14 am

Hi,
is it possible to remove an unused extruder and hot end from i3 pro c?
I already have removed the stepper, but if I remove the temperature sensor the printer Fail.
If I upload Pro b firmwere, would it work?

User avatar
William
Site Admin
Posts: 6331
Joined: Tue Jun 07, 2016 9:38 am

Re: i3 pro c in pro b conversion

Post by William » Mon May 11, 2020 11:08 am

Hi,it is not recommended that you remove them.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

fabiabio
Posts: 2
Joined: Mon May 11, 2020 4:53 am

Re: i3 pro c in pro b conversion

Post by fabiabio » Mon May 11, 2020 3:23 pm

I know that is not recomanded, but I'm upgrading my printer, and the double extruder is a big limitation,
if is possible to add an extruder on the pro b, why isn't possible to remove one from pro c?
if I change the firmwere it would work, or it will make strange things?

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests