Getting "mintemp triggered system stopped" in Repetier

Post Reply
simonjo
Posts: 2
Joined: Sun May 05, 2019 6:02 am

Getting "mintemp triggered system stopped" in Repetier

Post by simonjo » Sun May 05, 2019 6:25 am

Hi,

I built my i3 Aluminum not to the full extent as I don't want to use it as a 3D printer. I left out the heated bed and the extruder, so above error will be due to these missing components.

Can anyone tell me how to bypass this in some way.

My intention is twofold:
1) use the extruder stepper to drive a syringe mounted on the extruder carriage, for the purpose of dispensing solder paste
2) mount a milling head on the carriage (connected via a flex to a small milling motor) for the purpose of milling plastic housings


Any help would be welcome.
thx

simonjo
Posts: 2
Joined: Sun May 05, 2019 6:02 am

Re: Getting "mintemp triggered system stopped" in Repetier

Post by simonjo » Sun May 05, 2019 4:39 pm

Solved by attaching the temparature sensors


Now still need to figure out why Y axis is limited to 150mm and Z axis limited to 100mm

And what "Fr" in the info screen of the LCD display means

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Getting "mintemp triggered system stopped" in Repetier

Post by _kaktus_ » Sat May 11, 2019 8:12 pm

Hi.
:mrgreen:

FR is a print speed that you can modify to a certain extent. ;)
Changing the setting affects real-time printing.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest