What stepper motors are used with the i3Alu - current adjustment

Post Reply
onki
Posts: 32
Joined: Sun Dec 30, 2018 9:08 pm

What stepper motors are used with the i3Alu - current adjustment

Post by onki » Mon Feb 11, 2019 9:03 pm

Hi,

Does anyone knows details (voltage/current) about the stepper motors used with the i3 Alu?
I am using new driver boards (TMC2208) and want to adjust the motor current.

Best regards
Onki

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: What stepper motors are used with the i3Alu - current adjustment

Post by _kaktus_ » Fri Feb 15, 2019 3:57 am

Hi.
:mrgreen:
Read the motor designation from the body, enter it here.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 4642
Joined: Tue Jun 07, 2016 9:38 am

Re: What stepper motors are used with the i3Alu - current adjustment

Post by William » Mon Feb 18, 2019 10:53 am

You can invert the dir of the motor on Firmware.
Then it will work normal.
;)
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

onki
Posts: 32
Joined: Sun Dec 30, 2018 9:08 pm

Re: What stepper motors are used with the i3Alu - current adjustment

Post by onki » Mon Feb 18, 2019 10:42 pm

Hi William,

the direction is OK. I just want to know the nominal current to adjust my new driver boards.
It is a regular I3 Aluminum stepper motor.

Best regads
Onki

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: What stepper motors are used with the i3Alu - current adjustment

Post by _kaktus_ » Mon Feb 18, 2019 10:47 pm

Hello.
:mrgreen:

Each stepper motor has an inscribed type. If you don't read it and write it here nobody will help you.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest