Geeetech

Hello I bought my Geeetech I3 Aluminum form Amazon and it worked great until yesterday. (EU-Version)

I printed a case for my power supply and I forgott to take a picture on the cable routing of my switch.
So the result is that the fuse blown on my power socket plug.

My question is which fuse do I need. I know that I need a 250V with a dimension of 5x20 mm but I can't read the current on the fuse.( For me it looks like a 3A fuse).

My second question is if the new cable routing of my switch is correct. Greetings Viresneaker

Hello.


Your power supply is on 12V or 24V DC.

Hello
my power supply is 12V 15 A

Here is the picture of the blown fuse in the blue circle

Hi


The PSU should have a sticker with parameters.
There should be written a current, which is drawn from the mains at maximum load.

Hello thank you for the reply.

Input Power supply: 115V/1.5A or 230V/0.75A

So I need a Fuse with 0.75 A?

Or do I need a 10A because it is written on the Plug plastic (250V/10A)

On the blown Fuse is wirtten F_ 3 or 5 / 250V (can't read the current because of bad visibility)

That is why I am so confused what I need to use.

Greetings Viresneaker

Hi
I in your case with a fast fuse 1A 230V AC.

Thank you for the help

Greetings Viresneaker