Aluminium i3 extruder element issue (?)

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Aluminium i3 extruder element issue (?)

Post by _kaktus_ » Wed Oct 03, 2018 1:41 am

;)
grzałka_głowicy.jpg
grzałka_głowicy.jpg (168.14 KiB) Viewed 1287 times

:mrgreen:
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Msoucek@volny.cz
Posts: 6
Joined: Sun Sep 30, 2018 6:38 pm

Re: Aluminium i3 extruder element issue (?)

Post by Msoucek@volny.cz » Thu Oct 04, 2018 8:58 pm

Hello,
so today I have received already spare heating element and in this case it seems to be OK, no connection between leads and housing. Seems that I really had just bad luck for two non compliant pieces. I have already the plastic distances for the board but first I will try to isolate the holes using plastic washers for TO220 transistors. If these fits in the holes, I would not need to drill larger holes in the frame. All I need now is to have some spare time to do it. Lots of other work these days :cry:
Regards
Michal

User avatar
_kaktus_
Site Admin
Posts: 1237
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Aluminium i3 extruder element issue (?)

Post by _kaktus_ » Fri Oct 05, 2018 12:34 am

Hello,
:mrgreen:

Make a reclamation of the two previous exemplars.
If they are damaged they should be replaced immediately.

Head up, it will only be better. :D
Thanks to various problems you will get to know the equipment faster.

;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests