Fan placement

Post Reply
Bs2000
Posts: 16
Joined: Sat May 11, 2019 3:42 am

Fan placement

Post by Bs2000 » Sat May 25, 2019 8:08 pm

So building my M201 and the directions show the fan bolting onto the A1 with a fan cut out behind stepping motor on left side. Well mine doesn't have any cutouts or holes so where do I place fan?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fan placement

Post by William » Mon May 27, 2019 9:27 am

Hi, now the fan mounting hole on the mainframe is removed, and the fan of the main board is moved to the left side of the board. I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Fan placement

Post by _kaktus_ » Fri May 31, 2019 11:38 am

Hi.

Bs be so kind as to show a photograph of the problem. ;)
He will be happy to look into it.

I want to see how our model is developed. :D
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fan placement

Post by William » Fri May 31, 2019 12:03 pm

Hi, now like this :
M201风扇安装位置.jpg
M201风扇安装位置.jpg (238.67 KiB) Viewed 6912 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Fan placement

Post by _kaktus_ » Fri May 31, 2019 12:10 pm

Hi.
:mrgreen:

This is the old location of the fan. :roll:

I do not use it. In my opinion it is unnecessary.
Additionally, it weighs down on this small stabilizer causing additional reason for it to heat up.
And the fan is not able to cool it down. :(
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

User avatar
_kaktus_
Site Admin
Posts: 1260
Joined: Fri Dec 15, 2017 10:06 pm
Location: PL
Contact:

Re: Fan placement

Post by _kaktus_ » Mon Jul 01, 2019 2:51 am

;)
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.

Post Reply