A10M Simplify3d Settings

Share your configuration profile, please specify your printer model and the slicer software.
Post Reply
3dralf
Posts: 13
Joined: Thu Jan 03, 2019 3:14 pm

A10M Simplify3d Settings

Post by 3dralf » Fri Jan 11, 2019 7:58 pm

I've many Problems to using Simplify3d to print with only one filement, left or right side.
Are there somewhere some settings for Simplify3d ?

buttervonwaffle
Posts: 40
Joined: Sat Jan 05, 2019 6:12 pm

Re: A10M Simplify3d Settings

Post by buttervonwaffle » Sun Jan 13, 2019 5:16 am

I personally use cura, And I have ended up using Makers Muse 3d printing profile I do believe it came from one of his viewers, because they where trying to fix some stringing issues. He took time to correct any issues that the ender 3 had, and the best part the Geeetech a10 is an ender 3 clone, so this profile is perfect for the Geetech a10! He also has a 3d printer profile for simplify3D heres the link to it. makers muse ender 3 profile You dont have to pay for the download, he just has it setup for if you want to throw him some cash for the download you can. But the profile should help save you some time on setup.

Heres the cura profile download link as well - cura profile
Plus his video here subscribe to the guy hes definitely knowledgeable - video here

I have used his profiles and he definitely has them down pat.

Edit: I just realized it said A10M. So you will need to do some changes for the dual extruders. But same basic concept at least.
If something I said just helped you out tremendously you can drop a little ramen money, the coding monkeys in my basement will appreciate it - Feed them here

You can private message me if you have any questions I might be able to help.

3dralf
Posts: 13
Joined: Thu Jan 03, 2019 3:14 pm

Re: A10M Simplify3d Settings

Post by 3dralf » Sun Jan 13, 2019 6:49 pm

Thanks, i'll take a look at it,
but since i'm using S3d also for my Any i would prefere to use S3d for all of my printers

fred kaz
Posts: 2
Joined: Sat Mar 09, 2019 9:41 am

Re: A10M Simplify3d Settings

Post by fred kaz » Sat Mar 09, 2019 10:25 am

Did you sort this out, I am also using S3D and likewise the left/right extruder is very confusing. Plus also have you managed to get a good print. I am having problems with the extrusion multiplier setting

3dralf
Posts: 13
Joined: Thu Jan 03, 2019 3:14 pm

Re: A10M Simplify3d Settings

Post by 3dralf » Thu Mar 21, 2019 5:52 pm

sorry for the late reply,
S3D send me a profile, that works

attached
Attachments
Geeetech_A10M_PLA_RightExtruder.7z
(3.09 KiB) Downloaded 1306 times

Din0
Posts: 27
Joined: Mon Jan 27, 2020 9:33 pm

Re: A10M Simplify3d Settings

Post by Din0 » Fri Mar 27, 2020 2:56 pm

Hi
how do I set up S3D . After slicing, i'm only going to get this or nothing.
Thanks Ales
Attachments
S3D_2.jpg
S3D_2.jpg (279.92 KiB) Viewed 23229 times
S3D.jpg
S3D.jpg (179.43 KiB) Viewed 23229 times

Post Reply