So I just built my geeetech i3 3d printer and the y axis is going the wrong way. How do I fix this?

Post Reply
chetan101
Posts: 1
Joined: Fri Aug 21, 2020 12:00 am

So I just built my geeetech i3 3d printer and the y axis is going the wrong way. How do I fix this?

Post by chetan101 » Tue Sep 08, 2020 3:25 pm

Ok. Thats what I thought, but I asked, since sometimes there can be great 'hidden' features that I only learn about by asking what feels like is a stupid question. Cheers!

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: So I just built my geeetech i3 3d printer and the y axis is going the wrong way. How do I fix this?

Post by William » Tue Sep 08, 2020 4:43 pm

Hello, please check whether the connection between the motherboard and each axis is correct. Maybe you connected the wrong axis. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

User avatar
LoBoHEAT
Posts: 75
Joined: Fri Nov 24, 2017 6:56 pm
Location: Spain
Contact:

Re: So I just built my geeetech i3 3d printer and the y axis is going the wrong way. How do I fix this?

Post by LoBoHEAT » Thu Sep 10, 2020 4:39 am

If is reverse direction are two choices, change at firmware or reverse the motor connection.

Best regards.
Please, support my collaboration, buy me a Kofi https://ko-fi.com/lachusmadeti THANKS!!

Post Reply