Modifying Firmware with a Mac running Catalina

Post Reply
44_bh
Posts: 1
Joined: Sun Mar 22, 2020 3:58 pm

Modifying Firmware with a Mac running Catalina

Post by 44_bh » Tue May 26, 2020 2:45 am

Geeetech Prusa i3 Pro B with GT2560 Rev A+ Current f/w: Marlin 1.0.05

Problem: want to up'ld new f/w to add 3DTouch Sensor capability but latest Arduino version wont connect to the GT2560 although the relevant USB port is listed. Older version of Arduino 1.0.6 ( can't get 1.0.1) is not compatible with Catalina.

What do I do?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Modifying Firmware with a Mac running Catalina

Post by William » Wed May 27, 2020 9:29 am

Hi,are you using the version downloaded from the official website:
https: //www.geeetech.com/download.html? download_id = 40
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply