Problems for X-axies

Post Reply
Me.
Posts: 2
Joined: Tue Mar 24, 2020 8:03 pm

Problems for X-axies

Post by Me. » Tue Mar 24, 2020 8:42 pm

Hello,

I have a problem with my X-axies during my impression. The problem is that my X-axies Moving during the impression and then the impression is moving.
I make all seting he need with the user manual, and I don't know why the printer do that.

So thank you for answer of someone :D .

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Problems for X-axies

Post by William » Wed Mar 25, 2020 10:23 am

Hi,Is the model moving during printing?
Before printing, you need to level the hot bed.
The distance between the nozzle and the hot bed is the distance of a piece of leveling paper;
Then check the tightness of the belt,
Bearings and pulleys need to be lubricated for lubrication.
Do not print too fast.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Me.
Posts: 2
Joined: Tue Mar 24, 2020 8:03 pm

Re: Problems for X-axies

Post by Me. » Wed Mar 25, 2020 6:56 pm

Thank you for your answer,
I lubricate the axies and then is better,
I make the impression more slowly.

So thank you :D :D .

Post Reply