Brand New I3 Pro B LCD showing random characters

Post Reply
RichPrice
Posts: 3
Joined: Mon Mar 23, 2020 3:12 am

Brand New I3 Pro B LCD showing random characters

Post by RichPrice » Mon Mar 23, 2020 3:24 am

I just received and built my new I3 Pro B. Everything went smoothly during the build, but every since the first time it was turned on, the LCD only shows a series of garbled characters that change every second. I've googled around and tried as many suggestions as I dare.

Board versions are GT2560 Rev. A+ and DZ2004A-V1.3.
Attachments
IMG_E0819[1].JPG
IMG_E0819[1].JPG (125.7 KiB) Viewed 4231 times

RichPrice
Posts: 3
Joined: Mon Mar 23, 2020 3:12 am

Re: Brand New I3 Pro B LCD showing random characters

Post by RichPrice » Mon Mar 23, 2020 9:57 am

Resolved the LCD display issue after many wasted hours because I was searching for a .bin firmware file. A simple mention of the fact that it's a .hex file and that that's what you need to change the dropdown box to look for would be a nice thing to add to the Firmware Update Guide.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Brand New I3 Pro B LCD showing random characters

Post by William » Mon Mar 23, 2020 10:57 am

:D Hi,thanks for your feedback.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply