Not printing

Jon30b
Posts: 23
Joined: Thu Aug 15, 2019 3:13 am

Re: Not printing

Post by Jon30b » Mon Aug 26, 2019 6:21 pm

I have not changed any settings. The bed temperature is 50 C.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Not printing

Post by William » Mon Aug 26, 2019 6:37 pm

Hi, You can see that the hotbed and nozzle are heating up,


The setting is the setting of the hotbed
UBZVG3NKAH%T}WXB}U96F3G.png
UBZVG3NKAH%T}WXB}U96F3G.png (192.3 KiB) Viewed 5372 times
and extruder heating temperature in the consumables in the printer settings.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Jon30b
Posts: 23
Joined: Thu Aug 15, 2019 3:13 am

Re: Not printing

Post by Jon30b » Mon Aug 26, 2019 8:24 pm

It still does not print after waiting 15 minutues. The extruder temperature does not go above 29 C and the hotbeddoes not go above 50 C.

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Not printing

Post by William » Tue Aug 27, 2019 9:39 am

Jon30b wrote:
Mon Aug 26, 2019 8:24 pm
It still does not print after waiting 15 minutues. The extruder temperature does not go above 29 C and the hotbeddoes not go above 50 C.
Hi,Did you set the temperature of the print in the config-printer setting-material?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Jon30b
Posts: 23
Joined: Thu Aug 15, 2019 3:13 am

Re: Not printing

Post by Jon30b » Thu Aug 29, 2019 3:36 am

All settings are their defaults. Print temperature is 185 C

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Not printing

Post by William » Thu Aug 29, 2019 9:12 am

Jon30b wrote:
Thu Aug 29, 2019 3:36 am
All settings are their defaults. Print temperature is 185 C
Hi, You can set the temperature you want to print.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply