A30 Extruder Caliberation!!

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A30 Extruder Caliberation!!

Post by William » Thu Sep 10, 2020 11:05 am

Hello, if you can't use the LCD screen to control, you can connect the computer with a USB cable, and use the slicing software, such as repeter-host, to extrude 100mm. :D
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

USMCPelto
Posts: 7
Joined: Fri Sep 04, 2020 9:07 pm

Re: A30 Extruder Caliberation!!

Post by USMCPelto » Sat Sep 19, 2020 7:16 am

I used the PC software Repetier-Host. Connect to printer via USB, then dispense 100mm on manual control.

Post Reply