Fast filament unload GCode

Post Reply
Maccron
Posts: 35
Joined: Sun Jun 02, 2019 5:03 am

Fast filament unload GCode

Post by Maccron » Wed Jan 15, 2020 4:28 am

!
Last edited by Maccron on Sun Feb 07, 2021 4:42 am, edited 1 time in total.
A30M with 3DTouch.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fast filament unload GCode

Post by William » Wed Jan 15, 2020 9:36 am

Hi, Note about using tf card for printing:
The printer can only recognize .Gcode files, and the file name must be English letters, spaces, underscores and combinations thereof;
Gcode files cannot be placed in any folder of the TF card, otherwise the corresponding files cannot be read.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Maccron
Posts: 35
Joined: Sun Jun 02, 2019 5:03 am

Re: Fast filament unload GCode

Post by Maccron » Wed Jan 15, 2020 2:44 pm

!
Last edited by Maccron on Sun Feb 07, 2021 4:42 am, edited 1 time in total.
A30M with 3DTouch.
Top
Maccron
Posts: 35
Joined: Sun Jun 02, 2019 5:03 am

Re: Fast filament unload GCode

Post by Maccron » Wed Jan 15, 2020 2:55 pm

!
Last edited by Maccron on Sun Feb 07, 2021 4:42 am, edited 1 time in total.
A30M with 3DTouch.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fast filament unload GCode

Post by William » Wed Jan 15, 2020 3:31 pm

:D Hi, Don't save gcode files in folders,
After slicing the model through the slicing software,
Save the sliced file to the SD card.

I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech A30 Series”