How to Adjust the Max Temp in Firmware for A30

Post Reply
steveski21
Posts: 17
Joined: Tue May 31, 2016 6:55 pm

How to Adjust the Max Temp in Firmware for A30

Post by steveski21 » Sat Dec 21, 2019 7:03 am

Hi

Can someone please advise me on how to adjust the Max temp in the A30 Firmware I would like to lift it up from 250
is this possible through a Gcode Command ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to Adjust the Max Temp in Firmware for A30

Post by William » Sat Dec 21, 2019 9:25 am

Hi, If you need to change the temperature, you can change it in the tool:
FT$5CY%%7_QD4{XF$QTKO@O.png
FT$5CY%%7_QD4{XF$QTKO@O.png (87.53 KiB) Viewed 7114 times

and you can refer to this:viewtopic.php?f=17&t=60639&p=82054#p82054
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

steveski21
Posts: 17
Joined: Tue May 31, 2016 6:55 pm

Re: How to Adjust the Max Temp in Firmware for A30

Post by steveski21 » Sat Dec 21, 2019 9:39 am

I mean the Maxium Heating Temp not the PID settings

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to Adjust the Max Temp in Firmware for A30

Post by William » Sat Dec 21, 2019 11:34 am

Hi, The firmware currently provided is not able to change the temperature.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

steveski21
Posts: 17
Joined: Tue May 31, 2016 6:55 pm

Re: How to Adjust the Max Temp in Firmware for A30

Post by steveski21 » Sat Dec 21, 2019 12:37 pm

When will simple things like this and Auto PID be available ?

Danes94
Posts: 5
Joined: Wed Dec 18, 2019 3:27 pm

Re: How to Adjust the Max Temp in Firmware for A30

Post by Danes94 » Wed Jan 22, 2020 3:53 am

hola amigo encontrate alguna respuesta??, tabien busco como cambiar la configuracion de pines de la a30 con targeta gtm32 pro vd pero no en cuentro nada

Post Reply