A30 automatically pausing

Post Reply
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A30 automatically pausing

Post by William » Thu Nov 28, 2019 9:22 am

Hi, If it is printing for a long time, it is recommended to save the sliced print model into an SD card for printing.
Maybe touching the USB cable may cause this situation or signal interference may cause this situation.
Slice software. You can also try using Repetier Host.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

essex_chris
Posts: 11
Joined: Tue Apr 09, 2019 11:19 pm

Re: A30 automatically pausing

Post by essex_chris » Wed Dec 11, 2019 6:55 pm

I'm one of those who is getting pausing in prints - i am printing from SD. I am printing the benchy gcode file that came on the microSD card with the A30. I have tried more than 2 other different MicroSD cards.

I am on firmware V1.38.59 and i think Hardware version 2.0null or something. It's a 12V i believe.

I have a capactive touch sensor on it, bought from Geeetech on Amazon, as the bed is very warped. So many high and low spots.

How can i stop it from pausing during the prints?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A30 automatically pausing

Post by William » Thu Dec 12, 2019 9:16 am

Hi, have you checked if the heat bed itself is warped,
Regarding pausing printing, it is not recommended,
You can choose to pause printing on the screen.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply