A30 Bed level operation in Cura via USB/SD

Post Reply
User avatar
CallXYZ
Posts: 15
Joined: Sun Jul 21, 2019 8:14 am

A30 Bed level operation in Cura via USB/SD

Post by CallXYZ » Tue Aug 27, 2019 7:21 pm

When printing a file directly from the SD card with the A30 with Sensor, the printer is performing a checkup/leveling of the bed before printing.
It checkes 10 points on the bed.

When printing with Cura over the USB cable, the printer is performing only a short test and is touching only the middle of the bed.

Judging from the print quality, the detailed checkup/leveling with 10 measuring points is needed to ensure good quality

My guess is that Cura needs instructions for the detailed checkup/leveling in the start gcode.
Can we get the correct instructions for the start gcode?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A30 Bed level operation in Cura via USB/SD

Post by William » Wed Aug 28, 2019 9:16 am

Hi, You can level the points of the hot bed before printing starts.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply