Geeetech E180 first out of the box print

Post Reply
herr
Posts: 4
Joined: Fri Apr 17, 2020 9:46 am

Geeetech E180 first out of the box print

Post by herr » Wed Apr 22, 2020 4:42 am

Hello to you all,

This is my first out of box print.
Any advise will be helpful
Attachments
3d print.jpg
3d print.jpg (207.9 KiB) Viewed 12296 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech E180 first out of the box print

Post by William » Wed Apr 22, 2020 12:00 pm

Hi,it maybe lack material or nozzle clogged.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

herr
Posts: 4
Joined: Fri Apr 17, 2020 9:46 am

Re: Geeetech E180 first out of the box print

Post by herr » Fri Apr 24, 2020 7:34 pm

Second print. Still have no idea on how to setup or fix the issue.
Any help will be appreciated.
Attachments
20200424_071719.jpg
20200424_071719.jpg (302.88 KiB) Viewed 12147 times

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech E180 first out of the box print

Post by William » Sat Apr 25, 2020 9:41 am

Hi,the solid areas show spongy spots,
which may be due to insufficient extrusion when the printer cannot provide the correct amount of material needed for the correct printed layer.
1. You can check the filament path for blocked or strongly rubbed areas.
2. You can check whether the nozzle is blocked.
3. The number of top layers may be insufficient, and the number of layers can be increased accordingly.
4. Insufficient extrusion material may cause the nozzle to fail to meet the expected requirements, which can be adjusted by adjusting the extrusion amount.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

herr
Posts: 4
Joined: Fri Apr 17, 2020 9:46 am

Re: Geeetech E180 first out of the box print

Post by herr » Thu May 07, 2020 8:40 am

Thank you. Will try.

Post Reply