Problem with thin walls

Post Reply
Richardsonmata1
Posts: 1
Joined: Thu Jun 27, 2019 2:25 am

Problem with thin walls

Post by Richardsonmata1 » Thu Jun 27, 2019 2:54 am

Hello, I hope you can help me with this problem, it turns out that my E180 printer prints thin the walls of a project, is this. (gopro session)
WhatsApp Image 2019-06-26 at 1.37.28 PM.jpeg
WhatsApp Image 2019-06-26 at 1.37.28 PM.jpeg (98.38 KiB) Viewed 5397 times

this is the original
image.png
image.png (1.03 MiB) Viewed 5397 times
I am using CURA with these specifications,
especificaciones.jpg
especificaciones.jpg (334.19 KiB) Viewed 5397 times
Sorry for the English I am Mexican.
Does anyone know how to thicken the walls?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Problem with thin walls

Post by William » Thu Jun 27, 2019 9:16 am

Hi, you can refer to this:
cura设置壁厚.png
cura设置壁厚.png (214.04 KiB) Viewed 5379 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply