A10M Auto Bed Leveling Fails Hits The 'Y Axis Switch'.

Post Reply
loky
Posts: 2
Joined: Mon Aug 31, 2020 5:38 pm

A10M Auto Bed Leveling Fails Hits The 'Y Axis Switch'.

Post by loky » Mon Aug 31, 2020 8:20 pm

When I auto bed level the bed. it doesn't level it like it should do it. it probes the wrong places.
'Pls look at the video.( https://youtu.be/XvewuFwzRoo )

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: A10M Auto Bed Leveling Fails Hits The 'Y Axis Switch'.

Post by William » Tue Sep 01, 2020 10:10 am

Hello, this is a firmware problem. The leveling is too close to the edge. You can remove the clamp and level it again.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply