3d touch setting

Post Reply
albinszten
Posts: 1
Joined: Fri Mar 20, 2020 3:24 pm

3d touch setting

Post by albinszten » Mon Apr 20, 2020 3:34 am

Hello,



I put the 3d touch on my geeetech a20.



I have updated the firmware and the 3d touch works.



I'm having trouble adjusting the offset.



Once set: auto home then control with the z + sheet of paper.

I redo my corners then an autonomous for flush control.



I start printing and the nozzle is either too high or too base and I cannot print.



I tried dozens of settings in vain





Can you give me a tip because I can't do it.



I missed a step is not possible

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: 3d touch setting

Post by William » Mon Apr 20, 2020 5:37 pm

Hi, you can refer to this:viewtopic.php?f=27&t=18371
Hope to help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

cdricyates
Posts: 1
Joined: Mon Jun 29, 2020 3:34 pm

Re: 3d touch setting

Post by cdricyates » Mon Jun 29, 2020 3:40 pm

William wrote:
Mon Apr 20, 2020 5:37 pm
Hi, you can refer to this:viewtopic.php?f=27&t=18371
Hope to help you.
Thanks a lot! I'll try that out.

rouncewell
Posts: 2
Joined: Mon Aug 03, 2020 4:31 am

Re: 3d touch setting

Post by rouncewell » Mon Aug 03, 2020 4:57 am

I'm new to this and I'm looking for a better 3D touch settings. Thanks for link referral

--
rouncewell

Post Reply