Double extruder on I3 pro w

Post Reply
Psymon
Posts: 3
Joined: Sat Dec 28, 2019 7:31 pm

Double extruder on I3 pro w

Post by Psymon » Tue Jan 21, 2020 9:02 pm

hi everyone .... can i install double extruder on my I3 pro w printer with 3d touch sensor? If yes, which firmware should I install? or is it enough for me to modify mine for the double extruder?
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Double extruder on I3 pro w

Post by William » Wed Jan 22, 2020 9:45 am

:D Hi, If you want to change to a double extruder,
Can refer to pro c,
viewtopic.php?f=13&t=17887
Then flash the firmware of pro c with 3d touch.

You can refer to: viewtopic.php?f=13&t=17517
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Psymon
Posts: 3
Joined: Sat Dec 28, 2019 7:31 pm

Re: Double extruder on I3 pro w

Post by Psymon » Wed Jan 22, 2020 10:11 pm

Thanks ... I'll try it as soon as possible and let you know ...
Top
Psymon
Posts: 3
Joined: Sat Dec 28, 2019 7:31 pm

Re: Double extruder on I3 pro w

Post by Psymon » Mon Mar 16, 2020 9:05 pm

Thanks for the advice given to me ...
this is my printer built with double extruder ...
calibrated and functional ...
[img]https://ibb.co/tLNXs29
Thanks again...
Roberto
Top
Post Reply

Return to “Discuss & Help”