Voice recognition module isn't receiving data

Post Reply
effushit
Posts: 1
Joined: Sat Jan 04, 2020 1:56 am

Voice recognition module isn't receiving data

Post by effushit » Sat Jan 04, 2020 2:03 am

I'm using hterm software to send voice commands to the voice recognition module but it's not receiving data all the connection are perfectly stable nothing is loose. What should I do to receive voice command? Any HELP???

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Voice recognition module isn't receiving data

Post by William » Sat Jan 04, 2020 10:29 am

:D Hi,you can check the connection between voice recognition module and USB-TTL module is correct.
TXD pin on voice recognition module should be connected to RXD pin on USB-TTL module.
RXD pin should be connected to TXD pin.
If the connection is correct, please check the baud rate of serial software is set correctly.
The baud rate for voice recognition module defaults to 9600bps.
If you forget the baud rate, you can try 2400bps, 4800bps, 9600bps, 19200bps and 38400bps one by one.

I hope this can help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply