Fifty-fifty color of my printings (dual extruders)

Post Reply
User avatar
MrBorg
Posts: 19
Joined: Thu May 30, 2019 4:38 am

Fifty-fifty color of my printings (dual extruders)

Post by MrBorg » Sun Jul 07, 2019 3:22 am

Maybe I should have gone with a single extruder printer but now I have a Greeetech A20m and I still need to learn how to decide which color will be printed.

I use Cura 4.0 and have setup dual extruders and left (default) is chosen for the part that need to be black and the right is white. But when printing it keeps being swapped so what should be white get black and opposite.

Should I simple swap the setup of Cura 4.0 ?
Relevant information:
- Printer: Geeetech A20M with auto leveling
- Slicer: Cura 4.3.0
- Designer: TinkerCad
- Freehand Designer: 3D Slash

Seeking: The best slicer program for dual color printing

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Fifty-fifty color of my printings (dual extruders)

Post by William » Mon Jul 08, 2019 9:25 am

Hi, Cura does not support twin extruders, you can try to swap the position of the consumables.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply