a20m E0 will not print

Post Reply
Anthony78
Posts: 1
Joined: Mon Jul 08, 2019 1:00 am

a20m E0 will not print

Post by Anthony78 » Mon Jul 08, 2019 6:43 am

Hopefully I can get some help with this. My a20m will not print from the E0. E1 works perfectly, the E0 has yet to print. It feeds, it extrudes manually but fails when I go to print. If I am printing something with a dual ex option only one (e1) side will print. All it does is clog up. Please help

User avatar
William
Site Admin
Posts: 4336
Joined: Tue Jun 07, 2016 9:38 am

Re: a20m E0 will not print

Post by William » Mon Jul 08, 2019 9:36 am

Hi, Is your extruder motor working properly when printing? You can exchange the motor wires of the other axes with the motor wires of the extruder to see if the motor is normal.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

beyyy18
Posts: 6
Joined: Thu May 09, 2019 7:44 am

Re: a20m E0 will not print

Post by beyyy18 » Thu Jul 11, 2019 9:02 pm

Did you check that there were no problems during the installation?

___________________________________________
Mini Militia App Lock 7Zip

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests