Page 1 of 1

a10 new Fw

Posted: Wed Aug 08, 2018 11:43 pm
by jonA10
hi
i just download the new FW for Geeetech A10 .and upload it to the printer.
I try the resume print but didn't work.
any thing i should know?
thanks

Re: a10 new Fw

Posted: Thu Aug 09, 2018 10:56 am
by Alex-w
Hi jon.
I need more details:
1、firmware version?
2、what does "didn't work" mean?

Re: a10 new Fw

Posted: Thu Aug 09, 2018 9:56 pm
by jonA10
FW v1.0.04
geeetech A10.

when i try the resume print it didn't work.
and also every time i turn on the printer it always ask me if [ resume print ? yes/on].
before i update the printer i don't have that massage when ever i turn on the printer.

Re: a10 new Fw

Posted: Fri Aug 10, 2018 4:48 am
by jonA10
FW ver.1.0.04
The resume print always show up when I turn on my printer.
Thanks.

Re: a10 new Fw

Posted: Fri Aug 10, 2018 10:19 am
by Alex-w
@jonA10
you upgraded your machine from 1.0.04 to 1.1.8?

Re: a10 new Fw

Posted: Sat Aug 11, 2018 12:11 am
by jonA10
hi
I did not use the FW 1.1.8. I'm just using the FW from this forum. Because i don't know all the pin out of this board.(gt2560 REV B) by any chance do you have a pin out for this board?Because REV A and REV B are totally different.
thanks

Re: a10 new Fw

Posted: Mon Aug 13, 2018 4:38 pm
by Alex-w
We will send you a manual later to let you modify firmware to avoid this kind of situation from happening

Re: a10 new Fw

Posted: Wed Aug 15, 2018 7:14 am
by jonA10
Thanks you

Re: a10 new Fw

Posted: Wed Aug 15, 2018 11:38 am
by Admin
Hi @jonA10

We've sent an introduction for firmware modification about the problems of break-resuming to your register email.
Hope this will not bother you, because there are some problems with adding files in forum PM.
Please check your email inbox and also the spam.

Re: a10 new Fw

Posted: Tue Aug 21, 2018 6:50 pm
by MichaelK
jonA10 wrote:
Sat Aug 11, 2018 12:11 am
hi
I did not use the FW 1.1.8. I'm just using the FW from this forum. Because i don't know all the pin out of this board.(gt2560 REV B) by any chance do you have a pin out for this board?Because REV A and REV B are totally different.
thanks
You can find the pinout from Rev B here: http://www.geeetech.com/wiki/index.php/ ... 0_REVB.pdf

Wiki: http://www.geeetech.com/wiki/index.php/ ... r#Firmware