Page 1 of 1

Connection and print fails with Windows 10

Posted: Thu Nov 16, 2017 5:25 am
by gpau
Easy Print does not print, the com serial port is recognized because it feels the connection signal with the PC, but when the print order prints the Geeetech i3 Pro C does not start. Is not Windows 10 a problem or a driver?
Thank you

Re: Connection and print fails with Windows 10

Posted: Thu Nov 16, 2017 1:21 pm
by William
You should ensure the drive install correct and open the bottom of power

Re: Connection and print fails with Windows 10

Posted: Thu Nov 16, 2017 3:02 pm
by gpau
When I start the program and go to the printer hyphen button, geeetech is recognized by the PC, but when the print order does not print.
It sounds weird that it does not work on two PCs.
Thank you

Re: Connection and print fails with Windows 10

Posted: Mon Apr 08, 2019 8:50 pm
by hnswbr
Please help me I have the same problem. I tried everything, I am exhausted

Re: Connection and print fails with Windows 10

Posted: Thu Apr 11, 2019 2:05 pm
by William
Hi,hnswbr

You need to attach more details of it.
Then we can help to check it.
1.The PSU output is 12V/24V.
2.Try to replace the old PSU then test it again
3.Refer to this post and install the drivers for your win10
http://www.geeetech.com/forum/viewtopic ... 974#p81974

Re: Connection and print fails with Windows 10

Posted: Mon Apr 15, 2019 7:35 pm
by hnswbr
William wrote:
Thu Apr 11, 2019 2:05 pm
Hi,hnswbr

You need to attach more details of it.
Then we can help to check it.
1.The PSU output is 12V/24V.
2.Try to replace the old PSU then test it again
3.Refer to this post and install the drivers for your win10
http://www.geeetech.com/forum/viewtopic ... 974#p81974
William you a good guy. You saved my life.