Can't slice

Post Reply
BigE
Posts: 7
Joined: Thu Feb 02, 2017 5:16 am

Can't slice

Post by BigE » Thu Feb 02, 2017 5:22 am

I tried clicking on the Slicer and I get the following error
Print Slicer Error.png
Print Slicer Error.png (23.35 KiB) Viewed 19152 times

Windows 7 Enterprise Edition, 64 bit

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Can't slice

Post by William » Fri Feb 10, 2017 3:44 pm

You can try installing easy print on other disks(not Disk C) to take a look.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

BigE
Posts: 7
Joined: Thu Feb 02, 2017 5:16 am

Re: Can't slice

Post by BigE » Sat Feb 11, 2017 4:02 am

Yep. I'm going to install another hard drive in my computer just so that I can use a buggy slicer. :roll:

dart16
Posts: 2
Joined: Wed Feb 15, 2017 9:37 pm

Re: Can't slice

Post by dart16 » Wed Feb 15, 2017 9:41 pm

Already been stated on this forum that you need admin privileges to write to c:\program files(x86). What is needed is config files to be written to the users documents folder.....

bang
Posts: 402
Joined: Wed Dec 28, 2016 2:12 pm

Re: Can't slice

Post by bang » Thu Feb 16, 2017 3:37 pm

Indeed it should be...

Chema57
Posts: 0
Joined: Thu Nov 09, 2017 3:12 am

Re: Can't slice

Post by Chema57 » Thu Nov 09, 2017 3:34 am

I also can´t slice. I tried clicking on the Slicer and I get the following error:
I could not find the generated G-code file.
-the slicer had an error an didn´t finish slicing. Check log out put.
-the slicer stores the file with an unexpected filename.

Expected Filename and Location
C:\Users\Chema\AppData\Roaming\easyprint\work\composition.gcode

At first time y could slice without problem more than four files but now is impossible

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Can't slice

Post by William » Thu Nov 09, 2017 9:37 am

Is there any hint of the error code?Search on Google maybe help you.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply