How to connect a 2-pin PWN fan

Post Reply
stemboy400
Posts: 5
Joined: Fri May 31, 2019 1:52 am

How to connect a 2-pin PWN fan

Post by stemboy400 » Tue Feb 25, 2020 3:49 am

I have a pursa i3 Pro B and have recently bought a radial fan to cool the print but it has a 2 pin female conector.
IMG_1290.jpg
IMG_1290.jpg (616.36 KiB) Viewed 12959 times
and the printer controls board has a 3 pin port
IMG_1292.JPG
IMG_1292.JPG (430.19 KiB) Viewed 12959 times
so what should I do?
I have seen https://www.geeetech.com/12pcs-3pin-ff- ... p-292.html and I could take the connecter of the fan off and thread the cable into the jumper wire ind connect it like that?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: How to connect a 2-pin PWN fan

Post by William » Tue Feb 25, 2020 9:35 am

Hi,do you have a transfer port cable that can be converted.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

Post Reply